A valid RSA ID documentDescription
P9, Drive in Stud (Plug)
Drive in stud made out of steel with hardened body (diameter 14mm and height 7mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 9.1mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. Leave a gap of about 1mm between the stud head and the shoe to prevent the stud from coming loose. The stud can be reused by tapping it loose and applying it again as previously described.
This stud is designed to be used on hard surfaces or when the demand for grip is less. The design prevents injuries from kicking and stepping and can normally be used permanently.
Drive in stud made out of steel with hardened body (diameter 14mm and height 7mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 9.1mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. Leave a gap of about 1mm between the stud head and the shoe to prevent the stud from coming loose. The stud can be reused by tapping it loose and applying it again as previously described.
This stud is designed to be used on hard surfaces or when the demand for grip is less. The design prevents injuries from kicking and stepping and can normally be used permanently.